(Proposed) P2PSIP Working Group D. Bryan Internet-Draft SIPeerior Technologies and Intended status: Informational College of William and Mary Expires: April 25, 2007 P. Matthews Avaya E. Shim Panasonic Digital Networking Lab D. Willis Cisco Systems October 22, 2006 Concepts and Terminology for Peer to Peer SIP draft-willis-p2psip-concepts-03 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on April 25, 2007. Copyright Notice Copyright (C) The Internet Society (2006). Abstract This document defines concepts and terminology for use of the Session Initiation Protocol in a peer-to-peer environment where the Bryan, et al. Expires April 25, 2007 [Page 1] Internet-Draft P2PSIP Concepts and Terminology October 2006 traditional proxy-registrar function is replaced by a distributed mechanism that might be implemented using a distributed hash table or other distributed data mechanism with similar external properties. This document includes a high-level view of the functional relationships between the network elements defined herein, a conceptual model of operations, and an outline of the related open problems that might be addressed by an IETF working group. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [1]. Bryan, et al. Expires April 25, 2007 [Page 2] Internet-Draft P2PSIP Concepts and Terminology October 2006 Table of Contents 1. Background . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. Discussion . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3.1. What Kinds of P2PSIP Peers and Clients Might Exist? . . . 10 3.2. Reference Model . . . . . . . . . . . . . . . . . . . . . 11 3.3. The P2PSIP protocols . . . . . . . . . . . . . . . . . . . 14 3.4. Example Signalling Message Flows . . . . . . . . . . . . . 15 3.4.1. P2PSIP Peer contacts P2PSIP Peer . . . . . . . . . . . 15 3.4.2. P2PSIP Client contacts P2PSIP Peer . . . . . . . . . . 16 3.4.3. Conventional SIP Device using a Proxy Peer . . . . . . 18 3.4.4. Conventional SIP Device Using a Redirect Peer . . . . 19 3.5. Conceptual Outline of Operations . . . . . . . . . . . . . 21 3.5.1. Enrolling and Inserting an P2PSIP Peer . . . . . . . . 21 3.5.2. More on The Difference Between a Peer, Client, and User Agent . . . . . . . . . . . . . . . . . . . . . . 22 3.5.3. Enrolling a User and Inserting a P2PSIP User Agent . . 23 3.5.4. Bootstrapping . . . . . . . . . . . . . . . . . . . . 23 4. Questions . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4.1. PP2PSIP Peer Protocol . . . . . . . . . . . . . . . . . . 24 4.2. P2PSIP Client Protocol . . . . . . . . . . . . . . . . . . 25 4.3. How Do We Find Gateways? . . . . . . . . . . . . . . . . . 25 4.4. NAT Traversal . . . . . . . . . . . . . . . . . . . . . . 25 4.5. Cryptotransparency . . . . . . . . . . . . . . . . . . . . 25 4.6. Record Formats . . . . . . . . . . . . . . . . . . . . . . 26 4.7. Peer and Client Enrollment Protocols . . . . . . . . . . . 26 4.8. Peer and User Credentials . . . . . . . . . . . . . . . . 26 4.9. Bootstrapping . . . . . . . . . . . . . . . . . . . . . . 26 4.10. Credential Recovery . . . . . . . . . . . . . . . . . . . 26 4.11. Overlapping Domains . . . . . . . . . . . . . . . . . . . 26 4.12. Hybrid Domains . . . . . . . . . . . . . . . . . . . . . . 27 4.13. Admissions Control . . . . . . . . . . . . . . . . . . . . 27 4.14. Users versus Resources . . . . . . . . . . . . . . . . . . 27 5. Security Considerations . . . . . . . . . . . . . . . . . . . 27 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 27 7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 27 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 28 8.1. Normative References . . . . . . . . . . . . . . . . . . . 28 8.2. Informative References . . . . . . . . . . . . . . . . . . 28 Bryan, et al. Expires April 25, 2007 [Page 3] Internet-Draft P2PSIP Concepts and Terminology October 2006 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 29 Intellectual Property and Copyright Statements . . . . . . . . . . 31 Bryan, et al. Expires April 25, 2007 [Page 4] Internet-Draft P2PSIP Concepts and Terminology October 2006 1. Background One of the fundamental problems in multimedia communications between Internet nodes is that of a discovering the IP address at which a given correspondent can be reached. Correspondents are frequently identified by distinguished names, perhaps represented in the form of a universal resource indicator (URI) [2]. The Session Initiation Protocol (SIP) [3] commonly addresses this task assuming that the domain part of the URI indicates an internet host address or internet domain name using the Domain Name System (DNS) [4]. SIP's location process [5] assumes that the host part of the URI indicates either the target SIP user agent (UA), or a proxy that has knowledge of how to to reach the target UA, presumably gained through SIP's registration process. This approach, referred to herein as "Conventional SIP" or "Client/ Server SIP", assumes a relatively fixed hierarchy of SIP routing proxies (servers) and SIP user agents (clients). The routing proxies are typically resolvable using conventional Internet mechanisms with static IP addresses and associated DNS entries. This structure may not be ideal in all cases, including specifically ad-hoc, serverless, and reduced-administration scenarios. As an alternative, several authors [7] [8] [9] [10] have proposed using peer-to-peer (P2P) [11] approaches to solving the problem of locating the correspondent. The motivations for a P2P approach in SIP have been documented in [12]. This document offers a consolidation of the more important terms and concepts from several of the above documents, presented in the context of a reference model for peer-to-peer SIP (P2PSIP). It is intended that this document serve as a starting point for describing the work needed to resolve a number of open questions such that an IETF working group could be chartered to do the work needed to resolve these questions and present a standard solution. The authors believe that this goal is roughly consistent with that of a Protocol Model as defined in [13]. 2. Definitions This section defines a number of concepts that are key to understand the P2PSIP work. OPEN ISSUE: There is still much debate around the names attached to some of these concepts. (For now, the recommendation is to concentrate on the concepts and not worry too much about the names). Bryan, et al. Expires April 25, 2007 [Page 5] Internet-Draft P2PSIP Concepts and Terminology October 2006 Overlay Network: An overlay network is a computer network which is built on top of another network. Nodes in the overlay can be thought of as being connected by virtual or logical links, each of which corresponds to a path, perhaps through many physical links, in the underlying network. For example, many peer-to-peer networks are overlay networks because they run on top of the Internet. Dial-up Internet is an overlay upon the telephone network. P2P Network: A peer-to-peer (or P2P) computer network is a network that relies primarily on the computing power and bandwidth of the participants in the network rather than concentrating it in a relatively low number of servers. P2P networks are typically used for connecting nodes via largely ad hoc connections. Such networks are useful for many purposes. Sharing content files (see file sharing [18]) containing audio, video, data or anything in digital format is very common, and realtime data, such as telephony traffic, is also passed using P2P technology. . A P2P Network may also be called a "P2P Overlay" or "P2P Overlay Network" or "P2P Network Overlay" , since its organization is not at the physical layer, but is instead "on top of" an existing Internet Protocol network. P2PSIP: A suite of communications protocols related to the Session Initiation Protocol (SIP) [3] that extends SIP by using peer-to- peer techniques for resolving the targets of SIP requests. The exact contents of this protocol suite are still under discussion, but is likely to include the P2PSIP Peer Protocol and the P2PSIP Client Protocol (see definitions below). P2PSIP Overlay: A P2PSIP Overlay is an association, collection, or federation of nodes that provides SIP registration, SIP request routing, and similar functions using a P2P organization, as defined by "P2P Network" above. P2PSIP Peer: A node participating in a P2PSIP Overlay that provides storage and routing services (fully participates in the P2P routing) to other nodes in that P2PSIP Overlay. Each P2PSIP Peer is presumed to have a unique identifier within the P2PSIP Overlay. Each P2PSIP Peer may or may not be coupled to one or more P2PSIP User Agents. Within the P2PSIP Overlay, the peer is capable of performing several different operations, including: joining and leaving the overlay, routing requests within the overlay, storing information on behalf of the overlay, putting information into the overlay, and getting information from the overlay. A notable property of P2PSIP Peers is that they can be fully functional peers while residing behind NATs. Contrast this with some other Bryan, et al. Expires April 25, 2007 [Page 6] Internet-Draft P2PSIP Concepts and Terminology October 2006 P2P systems which make a distinction between "peer" and "super- peer" (or "node" and "super-node") where the latter must have a public IP address. P2PSIP Client: A node participating in a P2PSIP Overlay that provides neither routing nor route storage and retrieval functions to that P2PSIP Overlay. The P2PSIP Client interacts with the P2PSIP Overlay by having an association (details TBD) with one or more P2PSIP peers. Using these peers, the client can request the insertion of routing information (put in a Contact), or request the retrieval of routing information (get a Contact). Unlike the P2PSIP Peer, the client is presumed not to have a unique identifier within the overlay. In cases where conventional SIP is used for the P2PSIP Client protocol, this entity could be identical to a standard SIP entity (e.g., user agent or proxy or ...). A P2PSIP Client is a logical subset of a P2PSIP Peer; anything a P2PSIP Client can do, a P2PSIP Peer can do as well. Note that a P2PSIP Client is not necessarily a SIP UAC. OPEN ISSUE: The name for this concept is very much under debate. It conflicts with the usage of this name in SIP, and it suggest that a peer should be called a "server". P2PSIP Resource (User): An addressable user endpoint, entity, service, or function within a P2PSIP Overlay. Examples include but are not limited to humans, automata, bridges, mixers, media relays, gateways, and media storage. OPEN ISSUE: There is still a lot of uncertainty and debate around the difference, if any, between a "resource" and a "user". Even this document (which is the product of multiple authors) is inconsistent, sometimes treating them as more or less the same thing, and sometimes treating them as distinct concepts. P2PSIP Overlay Identifier: Information that identifies a specific P2PSIP Overlay. All the P2PSIP Peers in a particular P2PSIP Overlay have the same P2PSIP Overlay Identifier. This is may be scoped to a name within the DNS, but other scopes may apply, particularly in ad-hoc environments. P2PSIP Peer-ID: Information that uniquely identifies each P2PSIP Peer within a given P2PSIP Overlay. This value is not human- friendly -- in a DHT approach, this is a numeric value in the hash space. These Peer-IDs are completely independent of the identifier of any user of a user agent associated with a peer. (Note: This is often called a "Node-ID" in the P2P literature). Bryan, et al. Expires April 25, 2007 [Page 7] Internet-Draft P2PSIP Concepts and Terminology October 2006 P2PSIP Resource (User) Name: A distinguished, human readable name that identifies a specific P2PSIP Resource or User within a given P2PSIP Overlay. This is presumed to be a URI scoped to the P2PSIP Overlay Identifier. This is presumably the same or very similar to a SIP Address of Record, or AOR. P2PSIP Resource-ID: A non-human friendly value that uniquely determines which P2PSIP Peer is responsible for storing information about this resource (user). In a DHT approach, this is a numeric value in the hash space resulting from hashing the P2PSIP Resource Name. Since Resource-ID is in the same space as the P2PSIP Peer-ID, it allows for a mapping between the values, used to map a P2PSIP Resource to the P2PSIP Peer that stores it. P2PSIP Resource (User) Record: A block of data, stored using the data mechanism of the P2PSIP Overlay, that includes information relevant to a specific resource. We presume that there may be multiple types of resource records. Some may describe routes to a P2PSIP Peer or Client at which the user or resource is presumed reachable (e.g., a "user routing record" like a SIP "Contact:"). Others might store presence information. The types, usages, and formats of the records are a question for future study. P2PSIP User Agent (UA): A SIP user agent (UA) that is coupled with or incorporates a P2PSIP Peer or P2PSIP Client, such that the peer or client can assist the UA with registration (storage of a route to users of the UA) and/or routing of requests using the P2PSIP Overlay. A P2PSIP User Agent differs from a conventional SIP user agent in that it is coupled directly to a P2PSIP Peer or P2PSIP Client, and can therefore directly interact with a P2PSIP Overlay, which a conventional SIP UA cannot do. P2PSIP User Agents do not themselves have a distinguished name or identifier, although the P2PSIP User associated with it may, and if it is associated with a P2PSIP Peer, that peer may as well. P2PSIP Peer Protocol: The protocol spoken between P2PSIP Overlay peers to share information and organize the P2PSIP Overlay Network. P2PSIP Client Protocol: The protocol spoken between P2PSIP Clients and the P2PSIP Peer they use to store or retrieve information from the P2P Overlay. This is a functional subset of the P2P Peer Protocol, but may differ in syntax and protocol implementation (i.e., may not be syntactically related). Note that the precise relationship between the P2PSIP Peer Protocol and the P2PSIP Client Protocol (the same? subset?) remains an open question and is expected to be a principle topic of the detailed design work. This protocol may not exist (it may simply be conventional SIP) in Bryan, et al. Expires April 25, 2007 [Page 8] Internet-Draft P2PSIP Concepts and Terminology October 2006 some designs. P2PSIP Neighbors: The set of P2PSIP Peers that either a P2PSIP Peer or P2PSIP Client know of directly and can reach without further lookups. P2PSIP Bootstrap Peer: A P2PSIP Peer in the P2PSIP Overlay which is willing to help new Peers join the Overlay or help new Clients find Peers to associate with. A node that wishes to become a Peer or Client contacts a P2PSIP Bootstrap Peer and, with the help this Bootstrap Peer, gets the information it requires to become a fully functioning Peer or Client (the details of this process is still TBD). The new Peer or Client may locate a P2PSIP Bootstrap Peer through multicast, though a P2PSIP Bootstrap Server, or through other means. P2PSIP Bootstrap Server: A network node used by other nodes which are attempting to contact a P2PSIP Bootstrap Peer. It may return the address of a P2PSIP Bootstrap Peer, or act as a proxy to relay messages to and from the Bootstrap Peer, or act as a Bootstrap Peer itself. The P2PSIP Bootstrap Peer itself should be a fairly stable and well-known host. To be useful, there must be an easy way to other nodes to locate it -- one way this might happen is for it to have a well-known DNS entry. A P2PSIP Bootstrap Server may or may not also be a P2PSIP Peer or P2PSIP Client in one or more P2PSIP Overlays. P2PSIP Peer Insertion: The act of inserting a P2PSIP Peer into the current routing structure (presumably a distributed database or hash table) of a P2PSIP Overlay. For example, the routing structure map the peer's IP address or DNS name to the peer's P2PSIP Peer-ID. During insertion, the peer discovers its P2PSIP Overlay neighbors. Following insertion, the peer will be able to store user records (such as routing information), query other peers for user records, and pass requests to route messages to other peers. During the insertion process, the overlay may challenge the peer to prove that it is really allowed to insert itself into the overlay. (Note: In the P2P literature, this operation is often called "joining" or "registering" with the overlay). OPEN ISSUE: Some people are proposing that the name for this concept should be "P2PSIP Peer Admission" to better capture the fact that the Overlay can reject the peer if it does not have the correct credentials. Bryan, et al. Expires April 25, 2007 [Page 9] Internet-Draft P2PSIP Concepts and Terminology October 2006 P2PSIP Resource (User) Record Insertion: The act of inserting a record for a P2PSIP Resource (User) into the data maintained by the P2PSIP Peers. Following insertion, the data stored at one or more peers will contain a record (such as a P2PSIP Resource Routing Record), keyed at least in part by a P2PSIP User Identifier. P2PSIP Peer Enrollment: The initial one-time process a P2PSIP Peer follows to obtain an identifier and credentials, if any, within a P2PSIP Overlay. This is not performed each time the peer comes online (contrast to P2PSIP Peer Insertion above), but only the first time they do so, or following a loss of identifier or credentials by the peer. P2PSIP Resource (User) Enrollment: The initial one-time process a P2PSIP Resource follows to obtain a unique identifier within a P2PSIP Overlay. This is not performed each time the resource comes online, only the first time they do so, or following a loss of identifier or credentials by the client (contrast to P2PSIP Resource Record Insertion). 3. Discussion 3.1. What Kinds of P2PSIP Peers and Clients Might Exist? In general, P2PSIP nodes might have the same sorts of duties/logical roles as traditional client-server SIP nodes. This includes but is not limited to: 1. User Agent: a phone, voice mail server, bridge, or other device that initiates or terminates session requests. This could be a P2PSIP Client (only performs GET/PUT of data) or P2PSIP Peer (participates in storing data as well) 2. Media relay: a P2PSIP peer or client capable of relaying media sessions. For example, an RTP relay as described in [14] 3. Gateway: a P2PSIP peer or client that converts from P2PSIP to some other protocol, such as PSTN (Public Switched Telephone Network). 4. Redirector: a P2PSIP peer or client that accepts SIP requests (such as INVITE) for a P2PSIP resource identifier, searches the overlay, and returns the route to the resource in a 302 or 305 response. Bryan, et al. Expires April 25, 2007 [Page 10] Internet-Draft P2PSIP Concepts and Terminology October 2006 5. Proxy: a P2PSIP peer or client that accepts SIP requests (such as INVITE) for a P2PSIP resource identifier, searches the overlay, and forwards (proxies) the request to that resource. 6. Registrar: A peer or client that processes SIP REGISTER requests from non-P2P aware entities, either storing or retrieving the contact information to/from the routing data of the P2PSIP Overlay. 3.2. Reference Model The following diagram depicts a reference or "boxes and arrows" model showing several of the above peer and client types, along with a conventional SIP user agent. Bryan, et al. Expires April 25, 2007 [Page 11] Internet-Draft P2PSIP Concepts and Terminology October 2006 --->PSTN +------+ N +------+ +---------+ / | | A | | | Gateway |-/ | UA |####T#####| UA |#####| Peer |######## | Peer | N | Peer | | G | # P2PSIP | E | A | F | +---------+ # Client | | T | | # Protocol +------+ N +------+ # | # A # | NATNATNATNAT # | # # | \__/ NATNATNATNAT +-------+ v / \ # N | |=====/ UA \ +------+ A P2PSIP Overlay | | /Client\ | | T | Peer | |___C__| | UA | N Route Data | Q | | Peer | A +-------+ | D | T P2PSIP Peer Protocol # | | N # +------+ A # # T # # N +-------+ +-------+ # # A | | | | # #########T####| Proxy |########| Redir |####### N | Peer | | Peer | A | P | | R | T +-------+ +-------+ \__/ /\ / \ / UA \ /______\ SIP UA A Figure: P2PSIP Overlay Reference Model Here, the large perimeter depicted by "#" represents a stylized view of the P2PSIP Overlay and its associated routing data (the actual connections could be a mesh, ring, or some other structure). Around the periphery of the P2PSIP Overlay rectangle, we have a number of P2PSIP Peers -- a PSTN gateway peer "G", three user-agent peers "D", "E" and "F", two proxy peers "P" and "Q", and a redirector peer "R". Note that because these are all P2PSIP Peers, each is responsible for helping store some information of the P2PSIP Overlay. Bryan, et al. Expires April 25, 2007 [Page 12] Internet-Draft P2PSIP Concepts and Terminology October 2006 To the left, two of the peers ("D" and "E") are behind network address translators. These peers are included in the P2PSIP overlay and thus participate in storing information, despite being behind the NATs. Below the P2PSIP Overlay, we have a conventional SIP UA "A" which is not part of the P2PSIP Overlay, either directly as a peer or indirectly as a client. It speaks neither the P2PSIP Peer nor P2PSIP Client protocols. Instead, it uses pure (unmodified/extended) SIP to interact with with the P2PSIP Overlay. On the right side, we have a P2PSIP UA client "C", which uses the P2PSIP Client Protocol depicted by "=" to communicate with Proxy Peer "Q". The P2PSIP Client protocol only allows for gets and puts to the overlay. Therefore, "C" does NOT participate directly in/store information in the overlay. In a solution where the P2PSIP Client Protocol is SIP, such as is proposed in [7], there may no difference between UA client "C" and standard SIP UA "A". Note that in some scenarios, the P2PSIP Peers involved in the overlay might use a keepalive mechanism to ensure that messages to neighbors can pass through NATs. Presumably, these messages will be in the form of the P2PSIP Peer protocol. Both the "Proxy Peers" and "Redirect Peers" can serve as adapters between ordinary SIP devices and the the P2PSIP Overlay. Each accepts standard SIP requests and resolves the next-hop by using the P2PSIP overlay Peer Protocol to interact with the routing knowledge of the P2PSIP Overlay, then processes the SIP requests as appropriate (proxying or redirecting towards the next-hop). Note that proxy operation is bidirectional - the proxy may be forwarding a request from an ordinary SIP device to the P2PSIP overlay, or from the P2PSIP overlay to an ordinary SIP device. The Gateway Peer provides a similar sort of adaptation to and from the public switched telephone network (PSTN). However, there is a subtle distinction. The gateway function itself can be viewed as a "user" or within the P2PSIP overlay, and is addressed using a P2PSIP Overlay User Identifier. This gateway functionality could also be located in a P2PSIP Client, or even in a traditional SIP UA that is reached via P2P (using a P2P proxy or redirector) or conventional SIP mechanisms. The functions of various types of peers (redirect, UA, proxy, gateway) are logical roles. There is no reason a particular implementation could not support one, several, or all of these functions in one entity. For clarity, we show each as a fully distinct entity. Bryan, et al. Expires April 25, 2007 [Page 13] Internet-Draft P2PSIP Concepts and Terminology October 2006 3.3. The P2PSIP protocols This document describes two new protocols: the P2PSIP Peer Protocol and the P2PSIP Client Protocol. The P2PSIP Peer Protocol is spoken between peers. The details of this protocol are TBD, but the protocol needs to support, at a minimum, the following actions: o Enrolling a Peer in the Overlay o Inserting a P2PSIP Peer into the Overlay o Enrolling a Resource or User in the Overlay o Inserting a Resource or User into the Overlay o Retrieve information about a Resource or User from the Overlay The P2PSIP Client Protocol is spoken between a Client and a Peer. It is used by the Client to request service from the P2PSIP Overlay. This protocol is logically a subset of the Peer protocol, in that the actions that it supports are a strict subset of the actions supported by the Peer Protocol. These actions are: o Enrolling a Resource or User in the Overlay o Inserting a Resource or User into the Overlay o Retrieve information about a Resource or User from the Overlay The details of the Client Protocol are also TBD. Some people have proposed that the Client Protocol could be SIP. Finally, it should be re-iterated that the Client Protocol is a strict subset of the Peer Protocol (at least logically, the two may differ syntactically). This has two consequences: o A peer can do anything a client can do. In particular, it is quite possible to establish a SIP session between two peers. o It is possible to have a P2PSIP Overlay that consists of just peers. However, it is NOT possible to have a P2PSIP Overlay that consists of just clients, since a client can only connect to a peer. Bryan, et al. Expires April 25, 2007 [Page 14] Internet-Draft P2PSIP Concepts and Terminology October 2006 3.4. Example Signalling Message Flows The following show very high level examples of message flows for various interactions of devices within the reference model. In each case, we DO NOT show the flow of messages exchanged between P2PSIP peers to lookup information, since the exact nature of these flows and even who the messages would flow between will be a function of the particular data structure and protocol that is selected. We do however indicate when the lookups occur. As the working group makes various design decisions, the authors will update this document with more details on the various message flows. In a solution where the P2PSIP Client Protocol is some protocol other than SIP, all of the following example flows are needed. In a design where unmodified SIP is used for the P2PSIP Client, Section Section 3.4.2 is not needed. 3.4.1. P2PSIP Peer contacts P2PSIP Peer The following diagram shows P2PSIP UA Peer "E" placing a call to a user which is currently using the SIP UA on peer "F". The steps in this operation are: 1. UA Peer "E" first uses the P2PSIP Peer Protocol to communicate among the peers and obtain the location of the user. As a result of this operation, it is determined that the user is currently using the SIP UA on peer "F". (The flow is not shown as this will depend on the protocol designed). 2. "E" then establishes a session directly with "F" using a conventional SIP INVITE/200 OK mechanism. Bryan, et al. Expires April 25, 2007 [Page 15] Internet-Draft P2PSIP Concepts and Terminology October 2006 SIP INVITE/200 OK /----------------\ / \ --->PSTN +------+ N +------+ +---------+ / | | A | | | Gateway |-/ | UA |####T#####| UA |#####| Peer |######## | Peer | N | Peer | | G | # P2PSIP | E | A | F | +---------+ # Client | | T | | # Protocol +------+ N +------+ # | # A # | NATNATNATNAT # | # # | \__/ NATNATNATNAT +-------+ v / \ # N | |=====/ UA \ +------+ A P2PSIP Overlay | | /Client\ | | T | Peer | |___C__| | UA | N Route Data | Q | | Peer | A +-------+ | D | T P2PSIP Peer Protocol # | | N # +------+ A # # T # # N +-------+ +-------+ # # A | | | | # #########T####| Proxy |########| Redir |####### N | Peer | | Peer | A | P | | R | T +-------+ +-------+ Figure: P2PSIP Peer to Peer 3.4.2. P2PSIP Client contacts P2PSIP Peer NOTE: In a design where unmodified SIP is used for the P2PSIP Client protocol, this case does not exist/is not needed. Sections Section 3.4.3 and Section 3.4.4, covering conventional SIP access are all that are required. The following diagram shows P2PSIP UA Client "C" placing a call to a user which is currently using the SIP UA on Peer "F". The steps are: 1. "C" first sends a request to peer "Q" for the location of the user it wishes to contact. This request is sent using the P2PSIP Client Protocol. Bryan, et al. Expires April 25, 2007 [Page 16] Internet-Draft P2PSIP Concepts and Terminology October 2006 2. Some messages are exchanged among peer "Q" and other peers in the overlay using the P2PSIP Peer Protocol to perform the lookup. The details of this operation are not shown as this will depend on the protocol designed. 3. Peer "Q" returns a response to Client "C" (using the P2PSIP Client Protocol) saying that the user is currently using the SIP UA on Peer "F". 4. "C" then establishes a session directly with "F" using a conventional SIP INVITE/200 OK mechanism. SIP INVITE/200 OK /----------------------------------------+ / | / --->PSTN | +------+ N +------+ +---------+ / | | | A | | | Gateway |-/ | | UA |####T#####| UA |#####| Peer |######## | | Peer | N | Peer | | G | # P2PSIP | | E | A | F | +---------+ # Client | | | T | | # Protocol | +------+ N +------+ # | | # A # | | NATNATNATNAT # | | # # | \__/ | NATNATNATNAT +-------+ v / \ | # N | |=====/ UA \ / +------+ A P2PSIP Overlay | | /Client\/ | | T | Peer | |___C__| | UA | N Route Data | Q | | Peer | A +-------+ | D | T P2PSIP Peer Protocol # | | N # +------+ A # # T # # N +-------+ +-------+ # # A | | | | # #########T####| Proxy |########| Redir |####### N | Peer | | Peer | A | P | | R | T +-------+ +-------+ Figure: P2PSIP Client to Peer Bryan, et al. Expires April 25, 2007 [Page 17] Internet-Draft P2PSIP Concepts and Terminology October 2006 3.4.3. Conventional SIP Device using a Proxy Peer The following diagram shows a conventional SIP device, SIP UA "A", establishing a dialog with UA Peer "F". The steps in this example are: 1. "A" sends a conventional SIP INVITE to Proxy Peer "P". 2. Proxy Peer "P" uses the P2PSIP Overlay Protocol to locate the target. (The flow is not shown as this will depend on the protocol designed), in this case UA Peer "F". 3. "P" forwards the SIP request to the destination and proxies the response back to "A". Bryan, et al. Expires April 25, 2007 [Page 18] Internet-Draft P2PSIP Concepts and Terminology October 2006 --->PSTN +------+ N +------+ +---------+ / | | A | | | Gateway |-/ | UA |####T#####| UA |#####| Peer |######## | Peer | N | Peer | | G | # P2PSIP | E | A | F | +---------+ # Client | | T | | # Protocol +------+ N +------+ # | # A | # | NATNATNATNAT | # | # | # | \__/ NATNATNATNAT | +-------+ v / \ # N | | |=====/ UA \ +------+ A P2PSIP Overlay | | /Client\ | | T | | Peer | |___C__| | UA | N | | Q | | Peer | A | +-------+ | D | T | SIP INVITE/200 OK # | | N | # +------+ A | # # T | # # N +-------+ +-------+ # # A | | | | # #########T####| Proxy |########| Redir |####### N | Peer | | Peer | A | P | | R | T +-------+ +-------+ / / \__/ / SIP INVITE/200 OK /\ / / \/ / UA \ /______\ SIP UA A Figure: Proxied SIP dialog from SIP UA to P2PSIP UA through Peer Proxy 3.4.4. Conventional SIP Device Using a Redirect Peer The following diagram shows a second conventional SIP device, SIP UA "A" establishing a dialog with a P2PSIP Client UA "C". 1. "A" sends a conventional SIP INVITE to the Redirect Peer "R". Bryan, et al. Expires April 25, 2007 [Page 19] Internet-Draft P2PSIP Concepts and Terminology October 2006 2. Redirect Peer "R" uses the P2PSIP Peer Protocol to locate the target, in this case P2PSIP Client UA "C". (The flow is not shown as this will depend on the protocol designed). In contrast to the Proxy peer example above, "R" returns the result of the lookup to "A" as a 302 Moved message, with a contact of "C" (the conventional SIP 302 mechanism), rather than proxying the request for "A". 3. The conventional SIP UA "A" device can then establish the dialog directly with UA Client "C", even though "A" has no awareness of the P2PSIP Overlay, or of the P2PSIP Client Protocol. Bryan, et al. Expires April 25, 2007 [Page 20] Internet-Draft P2PSIP Concepts and Terminology October 2006 --->PSTN +------+ N +------+ +---------+ / | | A | | | Gateway |-/ | UA |####T#####| UA |#####| Peer |######## | Peer | N | Peer | | G | # P2PSIP | E | A | F | +---------+ # Client | | T | | # Protocol +------+ N +------+ # | # A # | NATNATNATNAT # | # # | \__/ NATNATNATNAT +-------+ v / \ # N | |=====/ UA \ +------+ A P2PSIP Overlay | | /Client\ | | T | Peer | |___C__| | UA | N Route Data | Q | | | Peer | A +-------+ | | D | T P2PSIP Peer Protocol # | | | N # 3) SIP INVITE +------+ A # /200 OK # T # | # N +-------+ +-------+ # | # A | | | | # | #########T####| Proxy |########| Redir |####### | N | Peer | | Peer | / A | P | | R | / T +-------+ +-------+ / \ / \ / 1) SIP INVITE \ \__/ / /302 Moved \ /\ / \ / \ / \/ UA \/ /______\ SIP UA A Figure: Redirect from P2PSIP Overlay 3.5. Conceptual Outline of Operations 3.5.1. Enrolling and Inserting an P2PSIP Peer Peers are the full-function "routing and storage" nodes of a P2PSIP Overlay. When a new peer is first created, it must enroll in the P2PSIP Overlay. We currently have no defined mechanism for this (should this group define one?), but we know that once the process is complete, the new peer will have at least a P2PSIP Peer-ID and Bryan, et al. Expires April 25, 2007 [Page 21] Internet-Draft P2PSIP Concepts and Terminology October 2006 optionally a set of credentials. After enrollment, each time the peer connects to the overlay, it must insert itself. We don't have a defined protocol mechanism for this, and assume we need one. Presumably the inserting peer connects with a P2PSIP Bootstrap Peer (possibly with the aid of a P2PSIP Bootstrap Server), presents its credentials, and after exchanging some messages with other P2PSIP Peers, ends up connected to the overlay. It will then have some knowledge of neighbors (successor, precursor, finger tables, or whatever the distribution mechanism defines) and is able to store data on behalf of and route requests to other nodes in the P2PSIP overlay. 3.5.2. More on The Difference Between a Peer, Client, and User Agent P2PSIP Peers directly interact with and contain the routing and storage fabric of the overlay. P2PSIP Clients simply use the routing and storage facilities provided by the peers to get and put information. The peers speak the P2PSIP Peer Protocol, which can express all the necessary routing and storage operations required for the overlay. Clients speak the P2PSIP Client protocol, which is presumably a subset of the peer protocol, and is limited to storage insertion (put) and storage retrieval (get). Some designs do not require a separate client protocol. Some peers and some clients may be coupled to SIP user agents, making them P2PSIP User Agents capable of both sending and receiving conventional SIP messages (as per a SIP UA) using conventional SIP resolution procedures and of using the resolution facilities provided by the overlay. The mix and configuration of peers, clients, and P2PSIP UAs is expected to vary depending on the deployment scenario. For example, an ad-hoc scenario might deploy nothing but P2PSIP Peers, each of which is coupled to a P2PSIP User Agent, using a broadcast or multicast bootstrap mechanism. Another common scenario, the "self organizing proxy farm", might consist of P2PSIP Peers, each of which is coupled to a SIP proxy/registrar function. Some of the systems proposed that use SIP for the P2PSIP Client protocol essentially remove that protocol from their design. Standard SIP messages are sent to a proxy or redirect server which speaks the P2PSIP Peer Protocol, eliminating the need for another protocol. Bryan, et al. Expires April 25, 2007 [Page 22] Internet-Draft P2PSIP Concepts and Terminology October 2006 3.5.3. Enrolling a User and Inserting a P2PSIP User Agent P2PSIP Clients and Peers are the nodes of a P2PSIP Overlay. Users are named entities that are associated with a Peer or Client. To get started, users must be enrolled in the overlay. We do not have a process or protocol for this, nor are we certain we need a standardized mechanism. We presume that after enrollment, the user has a distinguished name within the overlay (example: sip:bob@example.com) and a set of credentials useful for authenticating its usage of the distinguished name. One possible mechanism for these credentials would be an x.509 certificate. It might also be possible to use a PGP key, a password, or some other mechanism. Presumably following enrollment, the user is also equipped with the information needed to connect to the overlay, such as the address of a bootstrap server. Whether this startup information is delivered as a part of enrollment or through some separate configuration process remains an open question, and it is not clear it is within the scope of the proposed WG. Once a user is enrolled, the user may exercise a P2PSIP User Agent to insert into the P2PSIP Overlay. We currently have no protocol mechanism for this, and need to define one. The P2PSIP UA exercises the associated P2PSIP Peer or P2PSIP Client to execute the "registration" function and insert a route for the user into the P2PSIP overlay. This function is described as a "PUT" request, and results in the storage of an authenticated route-set for the user in the P2PSIP overlay, such that the terminus of the route is the URI of the user at the P2PSIP UA. This is analogous to "registration" in a classic SIP environment, and one mechanism proposed is in fact to use the SIP REGISTER method. Presumably, the P2PSIP UA connects to a peer or client and uses the user's credentials to authenticate a route-set (Contact: plus Path:) to itself, and the peer or client stores the route-set into the overlay, using a key derived from the user's identity. 3.5.4. Bootstrapping If a client or peer is just starting up and wants to join the overlay, then it first needs to find a P2PSIP Bootstrap Peer. Locating a P2PSIP Bootstrap Peer might be done in a number of ways: o By remembering peers that were part of the overlay the last time the node was part of the overlay; o Through a multicast discovery mechanism (e.g., something similar to the OSPF Hello protocol); Bryan, et al. Expires April 25, 2007 [Page 23] Internet-Draft P2PSIP Concepts and Terminology October 2006 o Through manual configuration; or o By contacting a P2PSIP Bootstrap Server, and using it to locate a bootstrap peer. A client or peer might reasonably try each of the methods (and perhaps others) in some order or in parallel until it succeeds in finding a bootstrap peer. Like a bootstrap peer, there are many ways that a peer or client could locate a P2PSIP Bootstrap Server. One likely method is for the peer to do a DNS lookup on a well-known URL. After discovering the address of a peer, the behavior of the starting node will vary depending on whether it is intending to be a peer or a client. If it is intending to be a peer, it goes into the P2PSIP Peer Insertion process, at the conclusion of which it is actively participating in the target overlay as a peer and is capable of routing requests and storing records on behalf of the P2PSIP overlay. If it is intending to be a client, it does not bother with insertion, but merely contacts the discovered peer in order to use the overlay. In the typical case, the peer or client coming up is also a P2PSIP User Agent with one or more associated P2PSIP Resource (User) Identifiers. The next step then is to insert a P2PSIP Resource Record (a Contact:) into the P2PSIP Overlay. Ideally, the mechanism for locating a bootstrap peer and handling a new peer or client will attempt to distribute the load evenly across the various nodes involved. 4. Questions This section lists some of the open issues that the proposed P2PSIP Working Group will have to address in the process of defining the Peer and Client protocols. 4.1. PP2PSIP Peer Protocol This may or may not be SIP. What should it be? Alternatives include SIP, a full IETF protocol based on OpenDHT, or something else. Do we need to define a new protocol? Will implementors want to implement a new protocol? Bryan, et al. Expires April 25, 2007 [Page 24] Internet-Draft P2PSIP Concepts and Terminology October 2006 4.2. P2PSIP Client Protocol This may or may not be SIP. What should it be? It defines only GET/ PUT operations, which could be done using SIP REGISTER transactions. Essentially disappears if we do select SIP. 4.3. How Do We Find Gateways? This needs to be not only netpath efficient, but also embodies elements of the TRIP and SPEERMINT problems. 4.4. NAT Traversal We assume that some or even many peers will be behind NATs. NATs introduce two problems: a) how to learn the address and port that can be used to reach the peer or client, and b) how to set up the necessary permissions (or "filtering entries") in the NAT to allow inbound packets. The IETF is currently defining the basic tools to solve these problems, namely the STUN/TURN/ICE suite of protocols [15] [14] [16] and the SIP-Outbound mechanism [17]. What the working group needs to do is work out how to use these tools to allow communication to peers behind NATs. In particular: 1. How to send P2PSIP Peer Protocol or P2PSIP Client Protocol messages between two peers or clients which may be behind different NATs? 2. How to send SIP messages between two peers or clients which may be behind different NATs? 3. How to locate STUN servers and media relays, especially when these may be services offered by peers or clients? We presume that the question of how to send media between two peers or clients is already solved by the STUN/TURN/ICE suite of protocols, assuming that the necessary STUN servers and media relays can be located. 4.5. Cryptotransparency When forwarding requests, are the bodies of the requests visible to peers? If so, this creates substantial security problems that the deployers of conventional SIP have been willing to mostly ignore. Can we make peers cryptotransparent (like HTTP proxies) when security is requested? Bryan, et al. Expires April 25, 2007 [Page 25] Internet-Draft P2PSIP Concepts and Terminology October 2006 4.6. Record Formats Clearly we need user routing records stored into the P2PSIP overlay. Do we need other sorts of record? If so, what? How do we differentiate between or classify records? Do we end up with many records per user per client, or do we aggregate the per-client or per-user view using something like XML? 4.7. Peer and Client Enrollment Protocols We know that we need to enroll peer and client nodes into a P2PSIP Overlay. Do we define a protocol or process for this, assume it will happen externally, or just provide an existence-proof argument? 4.8. Peer and User Credentials We believe that some form of credential will be used for authenticating peers and users in each P2PSIP Overlay. It remains to be determined what the characteristics of the certificates will need to be, and the use of self-signed vs. CA-produced certificates remains an open issue. 4.9. Bootstrapping We know that sometimes peers or clients will start up without knowledge of how to find a peer for insertion. In this case, what is the mechanism that a new peer or client uses to find a P2PSIP Bootstrap peer? 4.10. Credential Recovery One reader suggested that we extend the definition of P2PSIP Peer Enrollment to cover the case where a previously-inserted peer has lost its credentials (through, perhaps, being moved to a different host) and wishes to recover them without necessarily creating a new P2PSIP Peer-ID. The editors are inclined to believe that this is an operational issue, not a matter of definition, but would like to seek a broader consensus before concluding the topic. A similar question applies to user enrollment. 4.11. Overlapping Domains If the P2PSIP Resource (User) Identifier is not scoped to a single DNS domain, this would appear to allow nodes from two or more apparent domains to share a single P2PSIP Overlay. What, if anything, do we need to say about this mode of operation? Bryan, et al. Expires April 25, 2007 [Page 26] Internet-Draft P2PSIP Concepts and Terminology October 2006 4.12. Hybrid Domains It appears possible to have some hosts within a domain using conventional SIP and some using P2PSIP. This potentially raises a number of questions: 1) What should happen if we want to run a P2PSIP overlay in an existing SIP domain? 2) Do the existing redir/proxy servers need to be coupled with a peer layer? 3) When would an overlay peer want to discover them as opposed to looking in the overlay? 4) Is better not to run conventional SIP with P2PSIP? 5) When conventional and P2PSIP are run together, shall the existing redir servers keep their local databases or switch to the overlay storage. A related question is whether a UA could use the same AOR in conventional SIP and in P2PSIP? 4.13. Admissions Control What do we need to say about admissions control with respect to the enrollment of peers and users? Do we need to discuss per-call admissions control in a P2P environment? 4.14. Users versus Resources This model presumes that all addressable elements, aka "users", are unique. Are their other classes of resources that need some sort of class-addressable identifier that does not refer to a unique user? 5. Security Considerations Building a P2PSIP system has many security considerations, many of which we have only begun to consider. We anticipate that the protocol documents describing the actual protocols will deal more thoroughly with security topics. 6. IANA Considerations This document presently raises no IANA considerations. 7. Acknowledgements This document draws heavily from the contributions of many participants in the P2PSIP Mailing List but the authors are especially grateful for the support of Spencer Dawkins, Cullen Jennings, and Henning Schulzrinne, all of whom spent time on phone Bryan, et al. Expires April 25, 2007 [Page 27] Internet-Draft P2PSIP Concepts and Terminology October 2006 calls about this document or provided text. Additionally, Spencer provided a large portion of the ASCII art contained in this document. 8. References 8.1. Normative References [1] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [2] Berners-Lee, T., Masinter, L., and M. McCahill, "Uniform Resource Locators (URL)", RFC 1738, December 1994. [3] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP: Session Initiation Protocol", RFC 3261, June 2002. [4] Mockapetris, P., "Domain names - concepts and facilities", STD 13, RFC 1034, November 1987. [5] Rosenberg, J. and H. Schulzrinne, "Session Initiation Protocol (SIP): Locating SIP Servers", RFC 3263, June 2002. [6] Willis, D. and B. Hoeneisen, "Session Initiation Protocol (SIP) Extension Header Field for Registering Non-Adjacent Contacts", RFC 3327, December 2002. 8.2. Informative References [7] Bryan, D., "A P2P Approach to SIP Registration and Resource Location", draft-bryan-sipping-p2p-02 (work in progress), March 2006. [8] Shim, E., "An Architecture for Peer-to-Peer Session Initiation Protocol (P2P SIP)", draft-shim-sipping-p2p-arch-00 (work in progress), March 2006. [9] Sinnreich, H. and A. Johnston, "SIP, P2P, and Internet Communications", draft-johnston-sipping-p2p-ipcom-02 (work in progress), March 2006. [10] Matthews, P., "Industrial-Strength P2P SIP", draft-matthews-sipping-p2p-industrial-strength-00 (work in progress), February 2005. [11] Risson, J. and T. Moors, "Survey of Research towards Robust Peer-to-Peer Networks: Search Methods", Bryan, et al. Expires April 25, 2007 [Page 28] Internet-Draft P2PSIP Concepts and Terminology October 2006 draft-irtf-p2prg-survey-search-00 (work in progress), March 2006. [12] Bryan, D., "Use Cases for Peer-to-Peer Session Initiation Protocol (P2P SIP)", draft-bryan-sipping-p2p-usecases-00 (work in progress), December 2005. [13] Rescorla, E. and IAB, "Writing Protocol Models", RFC 4101, June 2005. [14] Rosenberg, J., "Obtaining Relay Addresses from Simple Traversal Underneath NAT (STUN)", draft-ietf-behave-turn-02 (work in progress), October 2006. [15] Rosenberg, J., "Simple Traversal Underneath Network Address Translators (NAT) (STUN)", draft-ietf-behave-rfc3489bis-04 (work in progress), July 2006. [16] Rosenberg, J., "Interactive Connectivity Establishment (ICE): A Methodology for Network Address Translator (NAT) Traversal for Offer/Answer Protocols", draft-ietf-mmusic-ice-11 (work in progress), October 2006. [17] Jennings, C. and R. Mahy, "Managing Client Initiated Connections in the Session Initiation Protocol (SIP)", draft-ietf-sip-outbound-04 (work in progress), June 2006. URIs [18] Authors' Addresses David A. Bryan SIPeerior Technologies and College of William and Mary 3000 Easter Circle Williamsburg, Virginia 23188 USA Phone: unlisted Email: bryan@ethernot.org Bryan, et al. Expires April 25, 2007 [Page 29] Internet-Draft P2PSIP Concepts and Terminology October 2006 Philip Matthews Avaya 100 Innovation Drive Ottawa, Ontario K2K 3G7 Canada Phone: +1 613 592 4343 x224 Email: philip_matthews@magma.ca Eunsoo Shim Panasonic Digital Networking Lab Two Research Way, 3rd Floor Princeton, New Jersey 08540 USA Phone: unlisted Email: eunsoo@research.panasonic.com Dean Willis Cisco Systems 3100 Independence Pkwy #311-164 Plano, Texas 75075 USA Phone: unlisted Email: dean.willis@softarmor.com Bryan, et al. Expires April 25, 2007 [Page 30] Internet-Draft P2PSIP Concepts and Terminology October 2006 Full Copyright Statement Copyright (C) The Internet Society (2006). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgment Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Bryan, et al. Expires April 25, 2007 [Page 31]